manualshive.com logo in svg

Toshiba Portege R400 Series, Руководство по обслуживанию, Страница: 161 / 369

Поделиться
Скачать
Toshiba Portege R400 Series Скачать руководство пользователя страница 161

3  Tests and Diagnostics 

TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) 

[CONFIDENTIAL] 

3-49 

3.22 Log 

Utilities 

3.22.1 Function Description 

This function logs error information generated while a test is in progress and stores the results 
in RAM. This function can store data on a floppy disk, or output the data to a printer or the 
display. 

The error information is displayed in the following order: 

1.

 

Error count (CNT) 

2.

 

Test name, Subtest number (TS-No) 

3.

 

Pass count (PASS) 

4.

 

Error status (STS) 

5.

 

FDD/HDD or memory address (ADDR) 

6.

 

Write data (WD) 

7.

 

Read data (RD) 

8.

 

HDC status (HSTS) 

9.

 

Error status name (ERROR STATUS NAME) 

If the power switch is turned off, the error information will be lost.  

Содержание Portege R400 Series


















































































































































































































































































































































































Отзывы:

Нет отзывов