manualshive.com logo in svg

Toshiba Portege R400 Series, Руководство по обслуживанию, Страница: 164 / 369

Поделиться
Скачать
Toshiba Portege R400 Series Скачать руководство пользователя страница 164

3  Tests and Diagnostics 

 

3-52 

[CONFIDENTIAL] 

TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) 

3.24  Floppy Disk Drive Utilities 

3.24.1 Function Description 

This function formats the FDD, copies the floppy disk and displays the dump list for both the 
FDD and HDD. 

1.

 

FORMAT 

NOTE

:  This program is only for testing a floppy disk drive. It is different from the 

Toshiba DOS FORMAT command. 

This program can format a floppy disk in the following formats: 

(a)

 

2DD: Double-sided, double-density, double-track, 96/135 TPI, MFM mode, 
512 bytes, 9 sectors/track. 

(b)

 

2HD: Double-sided, high-density, double-track, 96/135 TPI, MFM mode, 512 
bytes, 18 sectors/track. 

2.

 

COPY 

This program copies data from a source floppy disk to a target floppy disk. 

3.

 

DUMP 

This program displays the contents of the floppy disk and the designated sectors of 
the hard disk on the display.  

4.

 

HDD ID READ 

This program reads the hard disk ID and displays hard disk information. 

Содержание Portege R400 Series


















































































































































































































































































































































































Отзывы:

Нет отзывов