manualshive.com logo in svg

Toshiba PERCEPTION e, Руководство пользователя

Поделиться
Скачать
Toshiba PERCEPTION e Скачать руководство пользователя страница 27

NOTE: Camp-on and Call Waiting are mutually exclusive.

MESSAGES

MEET-ME PAGE

This feature will automatically connect you to a call that has been
"parked" for you by the operator. If you are away from your telephone,
the operator may park the call and direct you via the page system to dial
an access code.

You will hear dial tone.

You will immediately be connected to the caller.

MESSAGE CENTER OPERATION

The following applies only if your telephone is designated as the
Message Center.

The MSG LEDs on both stations will light, and the Message Center’s
MSG LED will go out when the connection is broken.

The MSG LED will go out (at both stations).

To Answer a Meet-me Page:

1. Lift the handset of any

telephone.

2. Dial the access code given by

the operator.

To Leave a Message Waiting
Signal:

1. Dial the appropriate station

number.

2. If you receive either busy or no

answer, press the 

MSG

button.

To Cancel Message Waiting by
Message Center:
1A. Dial the appropriate station

number.

2A. Press the 

MSG

button.

… or …

PERCEPTIONe

&

ex

DIGITAL TELEPHONE 

21

Содержание PERCEPTION e


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды