manualshive.com logo in svg

Toshiba PERCEPTION e, Руководство пользователя, Страница: 10 / 57

Поделиться
Скачать
Toshiba PERCEPTION e Скачать руководство пользователя страница 10

To Adjust Station-to-Station
Handsfree Volume:
While receiving a handsfree
station-to-station call, press the

VOLUME 

button until the desired

volume is set.

To Dial a Stored Telephone
Number:

1. Lift the handset.

2. Press the appropriate 

ADL

button.

To Store a Telephone Number
(for Telephones with Flexible
Automatic Dialing):

1. Leave the handset on-hook.

2. Press the desired

ADL

button.

3. Dial the telephone number to

be stored (16 digits
maximum).

4. Press the 

ADL

button again.

SPEED DIALING

AUTOMATIC DIALING

An Automatic Dialing (

ADL

) button allows you to store and automatically

dial any telephone number (up to 16 digits) by pressing a single button.
The stored number can be a station number, access code, or outside
number. If your telephone has Flexible Automatic Dialing, then you can
store numbers directly from your telephone. If, however, your telephone
has Fixed Automatic Dialing, stored numbers are fixed and can only be
altered via programming.

You will hear dial tone.

The telephone number will be dialed.

The ADL LED will flash.

NOTE: It may be necessary to insert a pause to allow for dial tone delay.
To enter a pause, press the 

* 

button after the trunk access code.

The ADL LED will go out, and the telephone number will be stored.

DIGITAL TELEPHONE

PERCEPTIONe

&

ex

4

Содержание PERCEPTION e


























































Отзывы:

Нет отзывов