Toshiba OIS-DS/Smart, Руководство по эксплуатации функций

Страница: 48 / 60

3. Basic Specification
34
Table 3.7. Unified Controller nv series type1 light
Item Specifications
Supported Model Unified Controller nv series type1 light
Single:PUM11/12/14(Single.), PUM12/14 and EN651A *1)
Duplex:PUM14(Duplex) , PUM14(Duplex) and EN651A *2)
Communication System pcmp
Collection (input) Data Max.960 words (use of D register)
It sets up by PLC configuration registration of an PLCS engineering tool.
Write(output) Data use of D register
It sets up by tag registration of an engineering tool.
Set Data Max.480 words (use of D register)
It sets up by PLC configuration registration of an PLCS engineering tool.
Collection(input)
Parameter
Max.960 words (use of D register)
It sets up by Parameter configuration of an PLCS engineering tool.
*1) Moreover, you need the following versions for the connect type1 light (Single).
PLCS Support Package V02.21 or newer
*2) Moreover, you need the following versions for the connect type1 light (duplex) .
PLCS Support Package V02.23 or newer
PLC Server Service Control V02.21 or newer
PLCS Engineering Tool V02.55 or newer
Table 3.8. Mitsubishi MELSECNET
/
H *1)
Item Specifications
Supported Model Redundant CPU (Q25PRHCPU)
MELSECNET/H (QJ71LP21-25)
MELSECNET/H Interface board
( PCI bus:Q80BD-J71LP21-25) * 2)
Communication System MELSECNET/H Communications
(Cyclic transmission functionality)
Collection(input) Data Max.990 words *3
(Use of link register LW, link register LB,or link scan area)
Write(output) Data Optional registers can be used
It sets up by tag registration of an engineering tool.
Set Data Not used
Collection(input) Parameter Max.990 words
* 1 ) Not supported onWindows 10
* 2 ) One wearing number of sheets of an interface board is possible.(Wearing of two or more sheets
is un-supporting.)
* 3 ) The area where LW or LB continued is used for collection data. (Mixture of LW and LB is
impossible.)