Toshiba MMW-UP0271LQ-E, Руководство пользователя

Страница: 7 / 15

– 6 –
2
Part names
 Hot water module
3
Part names and functions of the remote
controller
3-1. Wired remote controller (RBC-ASCU11- )
When operating the button, LCD backlight lights up for 15 seconds.
 Operation section
1
ON/OFF button
Turns on the unit when pushed, and turns off when
pushed again.
2
Setting button
For temperature setting.
3
OFF timer button
Set OFF timer.
4
Menu button
Heating mode is only available. Only heating
symbol is displayed.
Electrical control box
Water outlet
Water inlet
Earth screw
Equipped on the electrical
control box
Drain pan
1 2 3 4
Operation lamp
Lights up during
running.
Blinks when a trouble
occurs or the protective
device activates.
 Display section
All icons on the display are shown for this explanation. Icons related to heating do not appear for cooling only
models. Operations are not accepted when “
” is flashing.
1
Operation mode indicator
Indicates the operation mode selected.
2
Central control indicator
Displayed when the air conditioner (including Hot
water module) is controlled centrally and used with
central control devices such as the central remote
controller.
If the use of the remote controller is prohibited by
the central control,
blinks when the ON/OFF,
Setting or Menu button on the remote controller is
pushed, and the buttons do not function. (Settings
that can be configured on the remote controller
differ depending on the mode of the central
control. For details, read the Owner’s Manual of
the central remote controller.)
3
Setting indicator
Indicates that the system is automatically
checking after the circuit breaker is disconnected
or other conditions have occurred.
4
Service indicator
Displayed while the protective device works or a
check occurs.
5
Test run indicator
Displayed during a test run.
6
Temperature setting indicator
The selected set temperature is displayed.
7
OFF timer indicator
When a trouble occurs, the check code is
displayed. In normal condition, the time for OFF
timer is displayed.
8
Pre-heat indicator
Displayed when heating mode is activated or
defrost cycle is started.
9
Operation standby indicator
This indication is available on some models.
10
Notice indicator
Displayed while notice code occurs.
CAUTION
Remote sensor is not available for hot water module.
When remote controller is connected to hot water
module, the remote sensor does not work.
2
1
10
4
5
6
9
8
7
3
11-EN 12-EN