Installation Manual
16
16-EN
How to remove the drains cap
Clip the drain cap by needle-nose pliers and pull out.
+RZWRIL[WKHGUDLQVFDS
,QVHUWKH[DJRQDOZUHQFKGLDPPLQDFHQWUHKHDG
2) Firmly insert drains cap.
No gap
Insert a hexagon
wrench (4 mm)
Do not apply lubricating oil
(refrigerant machine oil) when
inserting the drain cap. Application
causes deterioration and drain
leakage from the plug.
CAUTION
Firmly insert the drain hose and drain cap; otherwise, water may leak.
How to remove the drain hose
1) Remove the front panel.
2) Remove the screws of drain hose.
3) Pull out the drain hose.
+RZWR¿[WKHGUDLQKRVH
1) Put the drain hose.
2) Screw the drain hose to the indoor unit.
3) Install the front panel.
T
In case of right or left piping
• After scribing slits of the front panel with a knife or a marking-off pin, cut them with a pair of nippers or
an equivalent tool.
Slit
