No. Component
Procedure
2
Discharge
1. Detachment
cabinet
1) Perform Step 1 of 1.
2) Remove the screws of the discharge cabinet
top of the heat exchanger plate.
(M4×10, 1 ) ( Fig. 2-1 )
3) Remove the screws of the discharge cabinet
and fin guard.
(M4×10, 3 ) ( Fig. 2-3 )
4) Remove the screws of the discharge cabinet
and partition plate.
(M4×10, 3 ) ( Fig. 2-4 )
5) Remove the screws of the discharge cabinet
and bottom plate.
(M4×10, 2 ) ( Fig. 2-4 )
6) Remove the screws of the discharge cabinet
(upper) and motor base.
(M4×10, 2 ) ( Fig. 2-5 )
Remarks
Heat exchanger
screw (1 posi
Ɵ
on)
Motor base
screws (2 po
ƐŝƟ
ons)
Fin guard
screws
;ϯƉŽƐŝƟŽŶƐͿ
Discharge
cabinet
Par
ƟƟ
on plate
screws (3po
ƐŝƟ
ons)
Discharge
cabinet
B tt
l t
2. Attachment
1) Mount by reversing the detachment procedure,
attaching the discharge cabinets in order.
Insert the hooking tabs into the holes in the
motor base and fix discharge cabinet in
place with screws. ( Fig. 2-6 )
Hooking tabs
Bottom plate
screws
;ϮƉŽƐŝƟŽŶƐͿ
( Fig. 2-1 )
( Fig. 2-5 )
( Fig. 2-2 )
( Fig. 2-3 )
( Fig. 2-4 )
( Fig. 2-6 )
141
