manualshive.com logo in svg

Toshiba M200 - Portege - Pentium M 1.5 GHz, Руководство по обслуживанию

Поделиться
Скачать
Toshiba M200 - Portege - Pentium M 1.5 GHz Скачать руководство пользователя страница 2

 

ii 

 

Portege M200Maintenance Manual (960-457) 

  

 

 

 

 

 

 

 

 

 

 

 

 

Copyright 

© 2003 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be 
reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, with 
respect to the use of the information contained herein. 

Toshiba Portege M200 Maintenance Manual 

First edition November 2003 

Disclaimer 

This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are 
accurate for the Toshiba Portege M200 at the time of this manual's production. However, succeeding computers 
and manuals are subject to change without notice. Toshiba assumes  no liability for damages incurred directly or 
indirectly from errors, omissions or discrepancies between the computer and the manual. 

Trademarks 

IBM is a registered trademark of International Business Machines Corporation. 
Intel, Pentium and Centrino are registered trademarks and Speed Step is a trademark of Intel Corporation. 
Windows and Microsoft are registered trademarks of Microsoft  Corporation. 
Bluetooth is a trademark owned by its proprietor and used by Toshiba under license. 
Other trademarks and registered trademarks not listed above may be used in this manual. 

Содержание M200 - Portege - Pentium M 1.5 GHz






































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды