Toshiba IP edge EC, Руководство по установке

Страница: 46 / 206

EP SERVER CHASSIS INSTALLATION EM Server Bezel
2-14 Installation Manual August, 2011
1. After the chassis has been secured to the rack place a key into the
slots on each end of the bezel.
2. Rotate the keys 90 degrees.
3. Place the bezel on the front of the chassis.
4. Rotate the keys 90 degrees then, remove.
5. Store the keys in an appropriate location.
EM Server Bezel The (P/N: I-EM-BZL-1A) bezel can be attached directly to the EM Server
chassis.
1. Remove the handles from the front of the server.
2. Attach the server handles received i the bezel kit.
3. After the chassis has been secured to the rack place a key into the
slots on each end of the bezel.
4. Rotate the keys 90 degrees.
5. Place the bezel on the front of the chassis.
6. Rotate the keys 90 degrees then, remove.
7. Store the keys in an appropriate location.
EP SERVER CHASSIS
INSTALLATION The IP edge EP server can be placed on a table or shelf. Refer to Figure
2-13 .
The location chosen must be free of vibration and the temperature must
meet the requirement shown in
“Environmental Specifications” on page
Chapter 2 –-7 .
Figure 2-13 IP edge EP server - Horizontal and Vertical Shelf Mount