background image

70

Preference 

On this page, you can tune the White balance, Image adjustment and WDR enhanced parameters. You 

can configure two sets of preferred settings: one for normal situations, the other for special situations, 

such as day/night/schedule mode.

White balance: Adjust the value for the best color temperature.

■ Auto: It will automatically adjust the color temperature of the light in response to different light sources. 

   You may follow the steps below to adjust the white balance to the best color temperature.

1. Set the White balance to 

Auto

.

2. Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the color 

temperature automatically.

3. Check 

Fix current value

 to confirm the setting while the white balance is being measured.

■ Manual: This item allows users to manually input the R gain & B gain ratios.

Image Adjustment

■ Brightness: Adjust the image brightness level, which ranges from +0 to +10

■ Saturation: Adjust the image saturation level, which ranges from -5 to +5. 

■ Contrast: Adjust the image contrast level, which ranges from -5 to +5. Please note that this function will 

be disabled if you enable WDR enhancement in the column below.

Sensor Setting 1:

For normal situations

Содержание IK-WD04A























































































































Отзывы: