98
Applications > Digital input
Advanced Mode
Digital input: Select High or Low to define the activate status for the digital input. The Network Camera's
current status is shown.
Set up the event source as DI on
Event > Event settings > Trigger.
Please refer to page 83 for detailed
information.
Applications > Tampering detection
This section explains how to set up camera tamper detection. With tamper detection, the
camera is capable of detecting incidents such as
redirection
,
blocking or defocusing
, or even
spray paint
.
Please follow the steps below to set up the camera tamper detection function:
1. Check
Enable camera tampering detection
.
2. Enter the tamper trigger duration. (10 sec. ~ 10 min.) The tamper alarm will be triggered only when the
tampering factor (the difference between current frame and pre-saved background) exceeds the
trigger threshold.
3. Set up the event source as Camera Tampering Detection on
Event > Event settings > Trigger.
Please refer to page 83 for detailed information.
