Toshiba IK-HD1C, Спецификация

Страница: 3 / 18

5. Command code (PC to camera)
Transmitted data Item
1st byte 2nd byte 3rd Byte 4th byte
Actions
SWITCH 4BH 01H FFH FFH DISP Functions in the same way as the front switches.
4BH 02H FFH FFH PAGE Note 1: The same as when the DATA UP is pressed for one
second.
4BH 03H FFH FFH MENU UP Note 2: The same as when the DATA DOWN is pressed for
one second.
4BH 04H FFH FFH MENU DOWN Note 3: The same as when the MENU UP is pressed for one
second.
4BH 05H FFH FFH DATA UP
4BH 06H FFH FFH DATA DOWN
4BH 07H FFH FFH AWB START(Note 1)
4BH 08H FFH FFH ABB START(Note 2)
4BH 09H FFH FFH ASHD START(Note 3)
4BH 0AH FFH FFH DATA PRESET(Note 4)
4BH 0BH FFH FFH FILE
Note 4: Remote presetting does not change the baud rate
setting. All other items function in the same way as
the presetting actions made by pressing the MENU
DOWN and DATA DOWN simultaneously. This
returns the product to its initial settings.
4BH 0DH FFH FFH KEY LOCK ON Functions in the same way as the KEY LOCK switch on the
rear panel.
4BH 0EH FFH FFH KEY LOCK OFF
4BH
１１
H FFH FFH GAIN Functions in the same way as the front switches.
05H ADDRESS FFH FFH MEMORY DATA READ REQUEST
For ADDRESS, see 11.”ADDRESS&DATA (1st byte=05H, 53H).”
53H ADDRESS DATA(L) DATA(H) MEMORY DATA WRITE REQUEST
For ADDRESS and DATA, see 11.”ADDRESS&DATA (1st byte=05H, 53H).”
MEMORY
FFH ADDRESS FFH FFH CAMERA STATUS READ REQUEST
For ADDRESS, see 13.”ADDRESS&DATA (1st byte=FFH).”
z
The tables in 10 and 11 (on page 7 and later) notate the data H first, then L. You should however transmit the data L first, then H.