Toshiba GR 200 Series, Инструкция по эксплуатации

Страница: 477 / 1563

6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 456 -
detected. The detecting signal is denoted as “Traveling OR” in Table 3.6-2.
*4
Note: Criteria “unmatched conditions” are decided when the “Test-bit status” in a
command is not identical to the “IED test status”.
*5
Note: The user needs to program the PLC logic “Control hierarchy condition”. The
user is also required to connect the logic condition with the select condition logic
using the connection point “LEDR01_CTRL_RIGHT”. For more information, see
chapter
Control and monitoring application: Control hierarchy.
“LEDR01_CTRL_RIGHT” is provided in Table 3.6-3.
*6
Note: To identify the input point of the LEDR function, see Table 3.6-2.
Table 3.6-2 Input signals for condition logic
Signal Number Signal Name Description M/O
522001 000A011001 S4301_STATE Command Blocking status ( Off / Blocked) N/A
5A0001 0008001F41 DCB RCV OR Double Command Blocking(DCB) is in progress. N/A
5A0001 0008001F40 Traveling OR Travelling events are detected. N/A
5A0101 3100001F43 SERI_ERR Serious Error detected N/A
523001 000D001F40 ASEQ_MULTI_SEL Automatic sequence control is in progress. N/A
Table 3.6-3 PLC connection point (Input point on select condition logic)
Signal Number Signal Name Description M/O
528001 820701ED50 LEDR01_CTRL_RIGHT LED Reset control hierarchy M
Table 3.6-4 Setting of LEDR
Setting Name Description Default Setting item or value
LEDDR1_EN Activate LED reset control On Off / On