Toshiba Gigashot GSC-R30, Руководство пользователя

Страница: 34 / 267

34
Turning the Camera On and Off
Turning the Camera On and Off by Opening and Closing the LCD Monitor
Opening the LCD monitor turns the camera on and closing
the LCD monitor turns the camera off.
The first time you use the camera, or when the battery has
been left out of the camera for a long period, the screen for
setting the date and time appears.
Set the date and time.
See “Setting the Date and Time”
p.35.
MEMO
• If [LCD-LINKED POWER] is set to [OFF], opening and closing the LCD monitor
does not turn the camera on and off. Slide the POWER switch to turn the camera
on and off.
• Use the mode LED to check whether the camera is turned on when the LCD
monitor is closed.
See “LCD-linked Power”
p.140.
See “Camera LEDs” p.25.
Turning the Camera On and Off by Sliding the POWER Switch
Sliding the POWER switch turns the camera on and off.
MEMO
• If the camera is not used for a set period of time, it automatically turns off to avoid
wasting battery power. This is called the Auto power off ( p.139).
• If you load the battery or connect the AC adapter without correctly shutting down
the camera first, the camera may not operate correctly. If this occurs, turn the
camera off and on again.
• To forcibly turn off the camera when there is a problem such as a system error,
slide the POWER switch across and hold it in place for at least 5 seconds. Note
that this may result in the loss of any files that are being created. Settings such as
the date and time may also revert to their default values. In this event, reset the
settings before using the camera again.
IMPORTANT
• If you open the battery cover when an AC adapter is not connected, the power will
automatically go off.
Load the battery.
See “Inserting and Removing the Battery”
p.28.