Toshiba GD-1370 Скачать руководство пользователя страница 25

Страница: 25 / 72

GD-1370

DIALING/COMMUNICATION CONTROL

3 - 5

(3) FCF

• Binary signals and functions for FCF

NSF

Non-Standard Facility

Informs that the receiving station (machine) has a non-standard facility.

NSC

Non-Standard Facility Command

Commands to transmit using the non-standard facility which is selected corresponding to

NSF (i.e., Polling etc.).

NSS

Non-Standard Facility Setup

Commands to transmit using the non-standard facility which is selected corresponding to

NSF or NSC.

CSI

Called Subscriber Identification

Provides the telephone number of the called station. Used to check the identity of the called

station.

CIG

Calling Subscriber Identification

Provides the telephone number of the calling station. Used to check the identity of the

calling station (Polling, etc.).

TSI

Transmitting Station Identification

Provides the telephone number of transmitting station. Used to check the identity of the

transmitting station.

DIS

Digital Identification Signal

Informs that the receiving station (machine) has a standard facility (G3/G2).

DTC

Digital Transmit Command

Commands to transmit using the standard facility which is selected corresponding to DIS

(i.e., Polling, etc.).

DCS

Digital Command Signal

Commands to transmit using the standard facility which is selected corresponding to DIS or

DTC.

SUB

Sub-address

Indicates that the FIF information is a sub-address in the domain on the call-in side.

SEP

Select Polling

Indicates that the FIF information is a sub-address for the polling mode.

PWD

Password

Indicates that the FIF information is a password for the polling mode in a reception.

Indicates that the FIF information is a password for transmission in a transmission.

CFR

Confirmation of Reception

Informs that the FAX is ready to receive data.

FTT

Failure to Train

Informs that the TCF signal has not received correctly and requests the re-training.

EOM

End of Message

Informs that the 1st page has been transmitted and there is the next page; commands to

return to the beginning of the phase B.

MPS

Multi-page Signal

Informs that the 1st page has been transmitted and there is the next page; commands to

return to the beginning of the phase C.

EOP

End of Procedure

Informs that a document has been transmitted and there is no more pages.

MCF

Message Confirmation

A reply to MPS, EOM or EOP; informing that image signals have been received correctly

and the Fax Unit is ready to receive data.

RTN

Retrain Negative

Informs that a document has not been received correctly; requests for the retraining or

phase synchronization to receive the next page.

PIP

Procedure Interrupt Positive

Informs that the image signals have been received correctly and requests the operator’s

reply by telephone or to return to the beginning of the phase B to continue the

communication (i.e., CALL Request, etc.).

Procedure Interrupt Negative

Informs that the image signals have not been received correctly and requests for operator’s

reply by telephone or to return to the beginning of the phase B to continue the

communication.

Содержание GD-1370

































































Результаты поиска

Содержание GD-1370

Отзывы:

Похожие инструкции для GD-1370

Бренды по названию

Популярные бренды

Toshiba GD-1370, Руководство по обслуживанию

Результаты поиска

Содержание GD-1370

Отзывы:

Похожие инструкции для GD-1370

Бренды по названию

Популярные бренды