Toshiba GD-1220, Руководство оператора, Страница: 80 / 262

3 ADVANCED FUNCTIONS
78 Communication Options
Communication Options
When transmitting a document, you can set the various communication options.These commu-
nication options set before you transmit a document is effective for only one transmission.
Communication Option Setting
Selectable communication options
ECM (Error Correction Mode) is an internationally standardized communication mode that auto-
matically corrects errors that occur during Fax transmissions. Even when the transmitted data
has been affected by noise during communication, this mode allows good communication with-
out image distortion by automatically resending the part that has been affected.
-
Both the transmitter and the receiver must have the ECM function to make ECM communica-
tion available.
- When affected by noise during communication, communication time takes longer than usual.
- Even when the ECM function is used, error communication may occur due to bad line condi-
tion.
- The ECM function is applicable to telephone call.
- Default: [ON] ( P.174 “ECM”)
Security TX This function allows transmissions only when the number you dial
matches the number programmed in the remote facsimile. If the num-
bers do not match, Security TX prevents the equipment from sending by
indicating a transmission error.
ECM This function allows good communication without image distortion by
automatically resending the part that has been affected.
Line Monitor This function is used to set the speaker ON in order to monitor the dialing
and connection portion of every transmission. This function is mainly used
to confirm dialing and phone line status.
(
P.156 “Abbreviated Dial Numbers”, P.160 “One Touch Key Dial
Numbers”)
Page Number This function is used to print the designated number of pages at the top of
the recording paper of the remote Fax.
Duplex Sending P.36 “Preparation for Transmission”
Menu List This function is used to print the Fax functions menu list.