Toshiba GD-1220 Скачать руководство пользователя страница 168

Страница: 168 / 262

5 ENTERING & SETTING ITEMS

166 Entering the Remote Fax Number

Group Number Dialing

You can send a document to multiple remote parties in a single operation. This is referred to as
Group Dialing or Multi-address Transmission.

Each group can contain any combination of the 300 Abbreviated and/or 75 One Touch dial
locations and can be assigned to a One Touch key.

You can register up to 50 Broadcast Groups using any combination of Group Numbers from
1 to 1999 (no duplications allowed).

Confirm the registered contents on the Group Number List. (

P.238 “Group number list”)

Entering group dialing numbers

Press the [FAX] button on
the control panel.

Press the

key.

"TEL LIST ENTRY" screen
appears.

Select “2. GROUP NUM-
BERS” using the

button and press the
[ENTER] button.

The screen to enter group num-
ber appears.

TEL LIST ENTRY

1.ABB. NUMBERS

2.GROUP NUMBERS

3.ONE TOUCH NUMBERS

TEL LIST ENTRY
1.ABB. NUMBERS

2.GROUP NUMBERS

3.ONE TOUCH NUMBERS

Содержание GD-1220







































































































































































































































































Результаты поиска

Содержание GD-1220

Отзывы:

Toshiba GD-1220, Руководство оператора, Страница: 168 / 262

Результаты поиска

Содержание GD-1220

Отзывы: