background image

 
 
 
 

 

G9000 80-225kVA TOSHIBA SYNC KIT Installation Manual 

– 94469-001

 

 

 

UNINTERRUPTIBLE POWER SYSTEM 

If additional information or technical assistance is required call TOSHIBA Customer Support Center at 877-867-8773, or 

write to: Toshiba International Corporation, 13131 West Little York Road, Houston, TX 77041-9990 Attn: UPS Product 

Manager. 

Please complete the following information for your records.   

Keep this manual with the UPS equipment.   

Job Number: 

 

Model Number:   

 

Serial Number: 

 

Application: 

 

Shipping Date: 

 

Date of Installation: 

 

Inspected By: 

 

IMPORTANT NOTICE

 

Never attempt to install, operate, maintain or dispose of this equipment until you have first read and understood all 

of the relevant product warnings and user directions that are contained in this Installation manual. 

The installation of this equipment must only be performed by qualified personnel. 

The Instructions contained in this manual are not intended to cover all of the details or variations in equipment or to 

provide for every possible contingency to be met in connection with installation, operation, or maintenance. Should 

further  information  be  required  or  should  particular  problems  arise  which  are  not  covered  sufficiently  the  matter 

should be referred to the local TOSHIBA sales office. 

Nothing in 

this manual shall alter Toshiba International Corporation’s standard terms and conditions or the 

conditions of any written sales contract. 

Any  Electrical  or  mechanical  modifications  to  this  equipment  without  prior  written  consent  of 

TOSHIBA will void all warranties and may void UL/CUL listing. Unauthorized modifications may 

also result in personal injury, death, or equipment damage. 

Содержание G9000 SERIES

























Отзывы: