Toshiba FT-8901A Скачать руководство пользователя страница 33

Страница: 33 / 40

TROUBLESHOOTING

Additional Information

PROBLEM

The answering
machine does not
answer the call.

Answering machine
does not play.

The messages are not
recorded/incomplete.

The answering
machine does not
respond to remote
operation.

The LED display shows
"A" (Announce only).

Can not delete
messages.

SOLUTION

• The recording capacity is full.

→

Delete some or all of the recorded messages.

• No message is recorded.

→

This is normal.

• The message was too long or too short.

→

The message should not be longer than the recording
time (1 or 4 minutes), or shorter than 2 seconds.

• The recording capacity became full.

→

Delete recorded messages.

• The phone was answered during recording.

• The recording time is set to A (announce only).

→

Set the REC TIME to 1 or 4 minute setting.

• You are not calling from a touch tone phone.

→

Call from a touch tone phone.

• The security code (PIN) you entered was wrong.

→

Make sure you entered the correct security code (PIN).

→

If the answering machine is turned off, let the phone ring
at least 10 times. The line will connect and you will hear
several short beeps. Press

and enter your security

code (PIN).

• This is normal. The recording time is set to A (announce only).

→

Set the REC TIME to 1 or 4 minute setting.

• There is a message that has not been played.

→

Play the new message, then delete messages.

FT-8901A.qx 7/2/1 11:36 AM Page 33

Содержание FT-8901A









































Результаты поиска

Содержание FT-8901A

Отзывы:

Похожие инструкции для FT-8901A

Бренды по названию

Популярные бренды

Toshiba FT-8901A, Руководство пользователя

Результаты поиска

Содержание FT-8901A

Отзывы:

Похожие инструкции для FT-8901A

Бренды по названию

Популярные бренды