14
INSTALLATION
Preparation
SETTING THE DIAL MODE
Most phone systems use tone dialing. But, to use tone dialing, you must
have a tone service dialing system supplied by your telephone company.
Then you must set your telephone dial mode for the type of service you
have. If you are not sure which type of service you have, do the following
steps.
1
With the phone in the Standby mode, press and hold
until
you hear a confirmation tone.
2
Press .
You hear a confirmation tone.
3
Press
and listen for a dial tone.
4
Press any number other than 0.
If the dial tone sounds, you have tone service and your setting is
complete. If the dial tone continues, you have pulse service and
you must perform steps 5 and 6 below.
5
With the phone in the Standby mode, press and hold
until
you hear a confirmation tone.
6
Press
and hear a confirmation tone. Your setting is complete
for pulse service.
FLASH
TALK
TONE/
FLASH
FLASH
Before using the handset, make sure to read the following instructions.
TALK
(PULSE MODE)
(TONE MODE)
TONE/
FT-8901A.qx 7/2/1 11:36 AM Page 14