Toshiba e-STUDIO556 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 104

Toshiba e-STUDIO556 Скачать руководство пользователя страница 16

1 TROUBLESHOOTING FOR THE HARDWARE

14 Clearing a Paper Misfeed



Clearing a paper misfeed

Remove paper misfed inside the equipment after you have cleared all other misfeeds. If you fail to clear all other
misfeeds first, the misfed paper may be torn and left inside the equipment.

1

Clear the paper misfeed

Clear the paper misfeed following the guidance shown on the touch panel. Press

or

to scroll the pages.

2

After clearing the misfeed, close all the opened covers.

The equipment starts the warm-up. Follow the guidance on the touch panel.



Tips on removing the misfed paper

Note the following points in removing the misfed paper.

Remove paper misfed inside the equipment after you have cleared all other misfeeds.

If you fail to clear all other misfeeds first, the misfed paper may be torn and left inside the equipment. Remove paper
misfed inside the equipment after you have cleared all other misfeeds.

Remove the misfed paper carefully so as not to tear it.

To avoid tearing the misfed paper, remove the paper slowly with both hands. Using force may tear the paper, making it
more difficult to remove. See also that no pieces of torn paper are left inside the equipment.

When the paper misfeed sign remains after removing the misfed paper;

Depending on the timing of the occurrence, no misfed paper may be found where the paper misfeed sign indicates. If the
sign does not disappear after you have removed the misfed paper, follow the steps as instructed on the touch panel.

Do not touch the fuser unit or the metal portion around it.

Do not touch the fuser unit or the metal portion around it when removing the
paper misfed inside the equipment. This could burn you or the shock could
cause you to get your hand injured in the machine.

«
...
14
15
16
17
18
...
»

Содержание e-STUDIO556









































































































Отзывы:

Нет отзывов