manualshive.com logo in svg

Toshiba e-STUDIO3511, Руководство по обслуживанию, Страница: 468 / 552

Поделиться
Скачать
Toshiba e-STUDIO3511 Скачать руководство пользователя страница 468

e-STUDIO3511/4511  FIRMWARE UPDATING

6 - 12

November 2003  ©  TOSHIBA TEC

(6)

Turn ON the power while [8] button and [9] button are pressed simultaneously.

The screen for selecting the items to be updated is displayed. “*” is displayed next to the items to

be updated. (All items are selected in the default settings.)

(7)

Select the item with the digital keys.

“*” is displayed next to the selected item. Display or delete the “*” by pressing the number of the

item. All items are selected in the default settings.

• Select all items to update the firmware of the equipment in a batch.

• Select items as follows to update it individually.

<Updating System ROM>

Select “1. OS Update”, “2. UI Update”, and “3. System Firmware”.

<Updating Engine ROM>

Select “6. Machine Firmware Update” only.

<Updating Scanner ROM>

Select “5. Scanner Firmware Update” only.

<Updating NIC ROM>

Select “4. NIC Firmware Update” only.

Содержание e-STUDIO3511









































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов