manualshive.com logo in svg

Toshiba e-STUDIO2500c, Руководство оператора, Страница: 316 / 414

Поделиться
Скачать
Toshiba e-STUDIO2500c Скачать руководство пользователя страница 316

8 JOB  STATUS

314    Error Code

2BA0

Invalid box password 
specified

Make sure that the password is correct and retry the scan, or 
reset the password and retry the scan. When this error occurs 
for the print of the data in the e-Filing, perform the print with the 
administrator’s password. If the recovery is still not completed or 
in case of invalid password for the operation other than printing 
(opening the file, etc.), contact your service representative.

2BB0

Job cancelled.

Job was cancelled by the user.

2BB1

Power failure 
occurred.

Make sure that the power cable is connected properly and it is 
inserted securely.

2BC0

System fatal error

Turn the power OFF and then back ON. Retry the print. If the 
error still occurs, contact your service representative.

2BC1

Failed to acquire 
resource

Ask your administrator if the e-Filing function is enabled. Retry 
the job in error. If the error still occurs, turn the power OFF and 
then back ON. And then retry the job in error.

2B60

The folder was 
renamed. A folder of 
the same name 
already existed.

Check the folder to be made.

2B70

The document was 
renamed. A document 
of the same name 
already existed.

Check the data to be stored.

2B71

The storage period of 
e-Filing documents will 
expire.

Check the storage period.

2B80

The HDD for storing 
e-Filing data is running 
out of space.

Delete the unnecessary data in HDD.

2BA1

Incorrect paper size or 
colour mode

This size or colour mode is not supported by e-Filing. Check the 
paper size or colour mode.

2BD0

Power failure occurred 
during restoring.

Check the power cable.

2BE0

Failed to obtain the 
machine parameters.

Turn the power OFF and then back ON to print again.

2BF0

Reached the maxi-
mum number of 
pages.

Reduce the pages to be inserted, and print them.

2BF1

Reached the maxi-
mum number of docu-
ments.

Delete unnecessary documents in the box or folder.

2BF2

Reached the maxi-
mum number of fold-
ers.

Delete unnecessary folders in the box.

Printer

4031

HDD full for printing

Too many jobs of Private print and department code print are 
stored in HDD. 

4032

Private-print-only error

Jobs other than Private print cannot be printed. Perform Private 
printing.

4033

Printing data storing 
limitation error

Printing with its data being stored to the HDD temporarily (Proof 
print, Private print, Scheduled print, etc.) cannot be performed. 
Perform normal printing.

4034

e-Filing storing limita-
tion error

Printing with its data being stored to the HDD (print and e-Filing, 
print to e-Filing, etc.) cannot be performed. Perform normal 
printing.

Error code

Problem

What to do

Содержание e-STUDIO2500c































































































































































































































































































































































































































Отзывы:

Нет отзывов