![background image](http://html.mh-extra.com/html/toshiba/e-studio-383p/e-studio-383p_user-manual_429093061.webp)
Troubleshooting > 61
7.
Remove any jammed paper from the face down stacker.
8.
Remove any jammed paper from the face up stacker.
9.
Open the rear cover and check for paper in the rear path.
>
Pull out any paper found in this area.
>
Close it once the paper is removed from this area.
NOTE
If the edge of the jammed paper protrudes (or can be seen) from the exit,
reinstall the image drum, close the top cover and switch the printer on. Remove
the jammed paper from the exit when the exit roller begins rotating after a few
seconds after switching on. However, if the jammed paper cannot be removed,
contact a service representative.
Содержание e-Studio 383P
Страница 1: ...User s Guide DIGITAL LED MONO PRINTER ...
Страница 75: ...DP 3830P ...