Toshiba e-Studio 383P страница 25 Скачать руководство пользователя | Manualshive

Страница: 25 / 76

background image

Paper recommendations > 25

3.

Adjust the paper guides (5) by gripping the lug and moving it backwards or forwards

to match the size of the paper used. It is important to adjust the paper guides

correctly to ensure that the paper is not skewed in the print process. Paper jams

may occur if this operation is not carried out correctly.

4.

Replace the tray in the printer.

Face

up and face

down printing

For face down printing, make sure the Rear stacker is closed (the paper exits from the top

of the printer). The Output Stacker on the top of the printer stacks printed pages face down,

capacity 150 sheets of weight 80g/m². Pages printed in reading order (page 1 first) will be

sorted in reading order (last page on top, facing down).
The face up stacker should be opened and the tray extension pulled out when required for

use. (With the face up stacker either opened or closed, the driver setting of face down will

successfully direct prints to the face down stacker.)
The face up stacker can hold up to 100 sheets 80g/m² standard paper.
Always use this stacker in conjunction with the Multi Purpose Tray or for heavyweight

stocks to reduce the possibility of paper jams.

See “Paper and tray information” on page 70.

Automatic feed sequence

With no optional feed trays installed, the Autotray function in the Print Menu is set by

default to ON

and the Tray sequence function is set to DOWN. In this way, if a tray runs

out of paper, automatic feed will take place in the order Tray 1, Tray 2 (if fitted), Multi

Purpose Tray, provided that these trays are set up for identical media. Also, configure the

media size and media weight for the respective trays in the operator panel.

M

ULTI

PURPOSE

TRAY

1.

Pull down the Multi Purpose Tray (1), extend the tray (2) and fold out the paper

supports (3), and adjust the paper guides to the width of the paper (4).

NOTE
If you have the optional second paper tray (Tray 2) and you are printing from
the first (upper) tray (Tray 1), you can pull out the second (lower) tray to
reload it. However, if printing from the second (lower) tray, do not pull out the
first (upper) tray as this will result in a paper jam.

1

2

3

4

5

«
...
23
24
25
26
27
...
»

Содержание e-Studio 383P













































































Отзывы:

Нет отзывов

Похожие инструкции для e-Studio 383P

MultiPASS L6000

Бренд: Canon Страницы: 251

MultiPASS C5500

Бренд: Canon Страницы: 24

MultiPASS L6000

Бренд: Canon Страницы: 24

Laser Class 700 Series

Бренд: Canon Страницы: 221

Бренд: Javelin Страницы: 2

Бренд: Datamax Страницы: 26

Бренд: Oki Страницы: 4

mC-Print3 MCP31LB

Бренд: Star Страницы: 12

Бренд: BenQ Страницы: 6

Бренд: Lexmark Страницы: 4

Бренд: Oki Страницы: 88

Бренд: Oki Страницы: 40

Бренд: Ricoh Страницы: 74

N2125N - DocuPrint B/W Laser Printer

Бренд: Xerox Страницы: 335

Бренд: Ricoh Страницы: 552

BradyPrinter A5500

Бренд: Brady Страницы: 72

RepRap Industrial

Бренд: Kuhling&Kuhling Страницы: 24

Бренд: Oce Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды