background image

Printer drivers > 30

P

RINTER

 

DRIVERS

This chapter describes how to install a printer driver on two types of operating system – 

Windows and Macintosh.
The printer drivers are all contained on the printer driver DVD. Please refer to the readme 

file on this DVD for the latest information on printer driver installation.

W

INDOWS

 

OPERATING

 

SYSTEMS

1.

With Windows running, insert the printer driver DVD into your DVD-ROM drive.

2.

If the DVD does not run automatically, use Start > Run... and enter E:\setup (where 

E is your DVD-ROM drive) in the Open field.

3.

Select the appropriate Setup language.

4.

Select your printer model and click 

I Agree

 to accept the terms of the Software 

License Agreement.

5.

Click on 

Driver Installation > Install Driver

 

and follow the on-screen prompts to 

complete your printer driver installation.

6.

Once the driver has been installed, the operator panel language switching utility will 

run automatically. Choose your preferred operating language. 

I

NSTALLED

 

OPTIONS

Certain options may have been installed in your printer. For those that are installed, check 

that they appear enabled on the Menu Map. 
Ensure that your options are set up in the printer driver(s) by making the appropriate 

settings on the Device Options tab (PCL emulation) and/or Device Settings tab (PS 

emulation) described in the chapter entitled “Operation”.

M

ACINTOSH

 

OPERATING

 

SYSTEMS

Please refer to the readme file on DVD for details on installing the appropriate Macintosh 

drivers.

I

NSTALLED

 

OPTIONS

Ensure that any installed options are enabled in the printer driver.

C

HOOSING

 

A

 M

AC

 

DRIVER

You can use a PCL Mac driver or a PS driver on Macintosh operating systems.

Содержание e-Studio 383P













































































Отзывы: