Faxing - e-STUDIO264CS only > 91
F
AXING
- e-STUDIO264CS
ONLY
S
ENDING
A
FAX
FROM
THE
MFP
This section details how to send a fax directly from your MFP.
B
ASIC
OPERATION
1.
Place your document(s) with text face UP in the ADF or face DOWN on the glass.
2.
Press the
Fax
button (1) on the control panel to prompt the
Fax Mode
screen.
3.
Ensure
Fax
is highlighted, then press
OK
.
4.
Set your destination and send properties as required. Refer to
for details.
5.
Press the
Mono
button (3) to start sending your document(s).
NOTE
If your Administrator has enabled access control on your machine, it will
automatically start up in access control mode. You will not be able to use it
until you have provided valid login information. Refer to
and access control” on page 41
for details.
When faxing, you can load only A4, letter, or legal size documents in the ADF,
and A4 or letter size documents on the document glass. You cannot load mixed
size documents.
NOTE
settings is available to Fax Function.
NOTE
If you wish to cancel faxing, press
Stop
(4) to abort the operation.
You can cancel a job that is being transmitted as long as the message
indicating the job has been completed has not displayed. Refer to
for details on how to cancel a reserved job.
When you select a broadcast job, the job itself is cancelled. If you want to
cancel an individual destination within a broadcast job, refer to
specified destinations” on page 94
.
Fax transmissions are sent in black and white only.
2
3
4
1
Содержание e-Studio 224cs
Страница 1: ...MULTIFUNCTIONAL DIGITAL SYSTEMS User s Guide ...
Страница 185: ... S S ...
