Toshiba e-STUDIO 161 страница 20 Скачать руководство пользователя

Страница: 20 / 76

BEFORE USING THE MACHINE

LOADING PAPER

Make sure that the machine is not copying or printing, and then follow these steps to load paper.

Loading the paper tray

Gently lift and pull out the paper tray
until it stops.

Push the pressure plate down until it
locks in place.

Push the center of the
pressure plate down until
it locks into place.

Fan the paper.

If the paper is not fanned,
double-feeds or misfeeds
may occur.

Load paper into the tray.

Gently push the paper tray into the
machine.

• Do not load paper higher than the line on

the tray (up to 250 sheets).

• Make sure that the paper fits under the

tabs on the right side of the tray.

• Make sure the stack of paper is straight

before loading it. When adding paper, take
the remaining paper out and combine it
into a single stack with the new paper.

Note

If you loaded a different size of paper than
was loaded previously in the tray, go to
"CHANGING A TRAY’S PAPER SIZE
SETTING" (p.16).

Note

Содержание e-STUDIO 161













































































Результаты поиска

Содержание e-STUDIO 161

Отзывы:

Похожие инструкции для e-STUDIO 161

Бренды по названию

Популярные бренды

Toshiba e-STUDIO 161, Руководство оператора

Результаты поиска

Содержание e-STUDIO 161

Отзывы:

Похожие инструкции для e-STUDIO 161

Бренды по названию

Популярные бренды