18
EN
18
EN
CONNECTION
Read this first:
1)
Disconnect the AC power cords of the devices from the AC outlet.
2)
Make the connection as illustrated below.
3)
After making all the connections, connect the AC power cords of the devices.
This connection is for
TV loop through only
VHF / UHF
antenna
cable TV
company
RF coaxial
cable
or
RF coaxial
cable
ANT. IN
rear of this unit
Choose one of the following connections
depending on the jacks on your TV.
Overview
If Your TV has
Refer to
If you are using
cable / satellite box
Standard
Quality
Higher
Quality
If your device has
only an ANT. IN jack
page
21
COMPONENT VIDEO IN
AUDIO IN
L
R
VIDEO IN
page
23
page
22
page
20
page
20
page
19
S-VIDEO IN
HDMI IN
ANT. IN
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, DVD playback pictures
may be distorted due to the copy protection system.
•
When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
Antenna Connection (Required)
Note
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack before
moving the unit.
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be
more effective than set-top versions.
• ANTENNA OUT jack is for tuner pass through only. DVD playback through the RF is not possible.
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
Please purchase the rest of the necessary cables at your local store.
E7SC0UD̲D-R570KU̲EN̲v1.1.indd 18
E7SC0UD̲D-R570KU̲EN̲v1.1.indd 18
2009/04/06 11:15:35
2009/04/06 11:15:35