Installation
Step 7: Raise the Base Unit Antenna
Strata CTX DKT2204-CT/DKT2304-CT Cordless Digital Telephones 06/03
23
Step 7: Raise the Base Unit Antenna
➤
Before using your handset, raise the base unit antenna to the vertical position.
Step 8: Install Handset Battery Pack
DKT2204-CT
1. Remove the battery cover by pressing the latch and sliding the cover down and off
the handset.
2. Slide the battery pack down into the handset
(shown right).
3. Securely close the battery compartment cover
by sliding it up until it snaps into place.
DKT2304-CT
1. Remove the battery cover by pressing the latch and sliding the cover down and off
the handset.
2. Connect the battery pack connector observing
correct polarity to the jack inside the battery
compartment. Do not exert any force on this
connection. It could cause damage to the
battery or handset. Once you are certain that
you have made a good connection, then insert
the battery pack into the battery compartment.
Do not pinch the wires (shown right).
3. Securely close the battery compartment cover
by sliding it up until it snaps into place.
CAUTION!
Rechargeable Nickel-Metal-Hydride batteries must
be disposed of properly.
4.