Toshiba D-VR4SC Скачать руководство пользователя страница 23

Страница: 23 / 166

Additional information

–

41, 24

–

Problems and troubleshooting / Video head cleaning

Video head cleaning

Video head clogging

The video heads are the means by which the DVD/VCR reads the picture from the tape during playback. In the
unlikely event that the heads become dirty enough to be clogged, no picture will be played back. This can easily be
determined if, during playback of a known good tape, there is good sound, but no picture (picture is extremely
snowy). If this is the case, have the DVD/VCR checked by qualified service personnel.

NOTES:

• DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE

REAR COVER.

• Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
• To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.

SYMPTOMS

POSSIBLE SOLUTIONS

PAGE

TV recording does not work.

Timer recording does not work.

Noise bars on screen.

• The erase prevention tab of the video cassette is broken off.
• The unit is in the external input mode.

• The time is not set correctly.
• The recording start/end time is not set correctly.
• TIMER REC has not been pressed ( is not lit).

• Tracking adjustment beyond range of automatic tracking circuit.

Try Manual tracking adjustment.

• Video heads are dirty.
• The tape is worn or damaged.

48, 54

26
58
59

–

No picture, or screen is blurred or
divided into two parts.

No 4:3 (16:9) picture

No on-screen display

Nothing appears in the display window

No surround sound

The unit or remote operation key is
not functioning.

Playback does not start when the
title is selected.

Audio soundtrack and/or subtitle
language is not changed when you
playback a DVD.

No subtitles

Angle cannot be changed.

“

” appears on the screen.

• The progressive scan mode is active though the unit is

connected to a TV via the VIDEO OUT jack.

• The setup does not match your TV.

• Select DISPLAY/CALL “ON”.

• Check the DIMMER setting for SETUP.

• The setup does not match your stereo system.

• Turn off the unit and unplug the AC power cord for several min-

utes, then replug it.

• Check the Parental setup.

• Multilingual language is not recorded on the DVD disc.

• Some discs have no subtitles.
• Subtitles are cleared. Press SUBTITLE.

• Multi-angles are not recorded on the DVD disc.

• The function is prohibited with the unit or the disc.

VCR

OTHER

Additional information

Check the disc space.

Load a recordable disc.

RAM Disc:
Turn the protect switch to OFF on
the cartridge itself.
Or turn OFF the protect from Disc
Setup.

Undo finalization or load another
disc for recording.

Load another disc for recording.

SYSTEM ERROR
PLEASE WAIT

SYSTEM ERROR
PLEASE WAIT
DISC CHECKING

SYSTEM ERROR
DISC MIGHT BE FAILED
PRESS ENTER/SELECT

NO DISC

REGION CODE ERROR

INCORRECT DISC - C104, C105,
C106, C107

NO DISC

PROCESSING
PLEASE WAIT

RECORDING INTERRUPTED -
C204

CANNOT RECORD - C203

CANNOT RECORD - C206

CANNOT RECORD, DISC PROTECTED

CANNOT RECORD - C208

CANNOT RECORD - C209

CANNOT RECORD - C210

DISC ERROR - C205, C211, C212,
C213
CANNOT RECORD, EXCEEDS
LIMITED NUMBER OF TITLES
CANNOT RECORD, EXCEEDS
LIMITED NUMBER OF CHAPTERS
CANNOT RECORD
PROTECTED IMAGE
RECORDING INTERUPTED
PROTECTED IMAGE
CANNOT RECORD IN VIDEO MODE.
COPY IMAGE ONCE ONLY.
CANNOT RECORD ON DISC.
THIS IS NOT CPRM DISC.

SWITCHING TO INTERLACE OUT-
PUT FOR COPYING

CANNOT COPY DATA - C251

CANNOT COPY DATA - C254, C255

COPYING INTERRUPTED

DISC ERROR - C302, C303

DISC ERROR - C304, C305

DISC ERROR - C306

DISC ERROR - C307, C308

CANNOT EDIT

CANNOT EDIT - C408

PROCESSING
PLEASE WAIT

Power ON

Playback

Recording

Dubbing

Disc setup

Title Menu

Error/Warning message list

ERROR/WARNING MESSAGE

CAUSE

POSSIBLE SOLUTIONS

PAGE

NOTE:

Any error/warning message other than those above might appear. Take measures against such a mes-
sage by seeing the possible solutions above.

The power was shut down without completing the
termination process due to a power failure or dis-
connection of the AC cord plug. (Abnormal termi-
nation)

The power was abruptly turned off before writ-
ing to the disc was completed.

The data restoration was completed.

When a disc was not loaded in the unit,

PLAY

was pressed.

A disc specified other than “Region 1” or “Region
ALL” was loaded.

The disc cannot be identified.

When a disc was not loaded into the unit,

REC/

OTR

was pressed.

The recording termination is processing.

Disc became full during recording.

Recording was tried onto the disc having no space.

Recording was tried onto the disc which does not
support recording.

Disc erase-protection is applied.

Recording was tried onto the finalized disc.

Adding data was tried onto the disc recorded in
the other unit.
Adding data was tried to the disc where PC data
was recorded.

Wait until the message disappears.

The data is now restoring.

Press

ENTER

, then the screen re-

turns to the normal display. The data
may not be restored even if the res-
toration process is performed.

Load a disc.

A disc specified other than “Region
1” or “Region ALL” cannot be played
back.

Check the disc and load a proper
disc.

Load a disc.

Wait until the process is completed.

Erase unnecessary titles or load
another disc and restart recording.

Combining chapters cannot be performed.

A process requiring a longer time such as edit-
ing is being performed.

Chapter marks that have been
added automatically in the erasing
of a scene procedure cannot be
erased.

Wait until the process is complete.

A scratch or contamination was found on the disc.

99 titles were recorded on the disc.

999 chapters exist on the disc.

Recording was attempted on a copy protected
video.
The video was changed to a copy-guard format
in recording.

Recording was attempted of a “Copy Once” program
onto a disc (Video mode).
Recording was attempted of a “Copy Once” program
onto a disc without CPRM.

Dubbing was initiated from a disc to a video tape
in the progressive scan mode.

No video tape or disc is inserted as a source for
the recording.

The source video or disc to be copied is copy-
guarded.

The video tape or disc became full during dubbing.

Cannot Format disc due to a scratch or contami-
nation on the disc.

Cannot Finalize disc due to a scratch or con-
tamination on the disc.

Cannot Undo Finalize disc due to a scratch or
contamination on the disc.

Cannot Protect disc ON/OFF due to a scratch
or contamination on the disc.

Editing cannot be performed due to a scratch or
contamination on the disc.

Check the disc and reload it, or use
another disc for recording.
Erase unnecessary titles or load
another disc.

Erase unnecessary chapters or
load another disc.
You cannot record a copy protected
video.

You cannot record a copy protected
video.
Load a DVD-RW Ver. 1.1 or later
(VR mode) with CPRM.
Load a DVD-RW Ver. 1.1 or later
(VR mode) with CPRM.

The mode is automatically changed
to interlaced mode if dubbing from
a disc to a video tape.
Load a video tape or disc into the
source drive.

You cannot dub a video containing
copy-guarded material.

Load another video tape or disc for
recording and restart.

Check the disc and reload it, or use
another disc for recording.

77, 78

GENERAL

Power supply:
Power consumption:

Weight:
Dimensions:

Operating temperature:
Operating humidity:
Inputs/Outputs:

Video:

Audio:

Antenna:

VCR section

Video head:
Audio track:
Tuner:

RF channel output:
F.FWD/REW Time:
Hi-Fi frequency response:
Hi-Fi dynamic range:

DVD section

Signal system:
Applicable disc:
Recording format:

Recording discs:
Recording time:
(based on a 4.7GB disc)

Audio characteristics
frequency response:

S/N Ratio:
Harmonic distortion:
Wow and flutter:
Dynamic range:
Output:

Pickup:

ACCESSORIES:

AC 120V 60Hz
Operation: 29W
Standby: 2.5W (if display window is off.)
12.1 lbs (5.5 kg)
Width : 16-15/16 inches (430 mm)
Height : 3-1/2 inches (89.5 mm)
Depth : 12-9/16 inches (318.5 mm)
41

F to 95

F (5

C to 35

Less than 80% RH

In: 1Vp-p/75 ohm
Out: 1Vp-p/75 ohm
In: –8dBm/50k ohm
Out: –8dBm/1k ohm
UHF/VHF IN/OUT: 75 ohm coaxial

4 Rotary Heads
Hi-Fi Sound - 2 Tracks / MONO Sound - 1 Track
181 Channel Freq. Synthesized
VHF

2-13

UHF

14-69

Cable TV 14-36 (A)-(W)

37-59 (AA)-(WW)

60-85 (AAA)-(ZZZ)

86-94 (86)-(94)

95-99 (A-5)-(A-1)

100-125 (100)-(125)

01 (5A)

Channel 3 or 4, Switchable
Approx. 1minute and 48 seconds (with T-120 Cassette Tape)(at+25˚C)
20Hz to 20,000Hz
More than 90dB

NTSC
DVD (12cm), CD (12cm)
DVD-Video Recording (VR mode)
DVD-VIDEO (Video mode)
DVD-RAM, DVD-RW, DVD-R
XP: Approx. 60 min
SP: Approx. 120 min
LP: Approx. 240 min
SLP: Approx. 360 min

DVD: 4Hz - 22kHz
CD: 4Hz - 20kHz
90dB
Less than 1%
Less than 0.01% Wrms
More than 90dB
Video : (RCA) 1 Vp-p/75 ohm
Audio : (RCA) –12 dBm/1k ohm
Digital Audio : 0.5Vp-p/75 ohm
CD :

Wavelength: 780 nm
Maximum output power: 8.5 mW

DVD : Wavelength: 660 nm

Maximum output power: 120 mW

Remote control (SE-R0180) x 1
75 ohm Coaxial Cable x 1
AUDIO/VIDEO Cable x 1
Battery R03/AAA x 2

Specifications

• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.

Additional information

Limited United States Warranty
Digital Audio Video ("DAV") Product - Depot Repair Warranty

Toshiba America Consumer Products, L.L.C. ("TACP") makes the following limited warranties to original consumers in
the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR
ANY PERSON RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER
AND TO NO OTHER PURCHASER OR TRANSFEREE.

DAV PRODUCTS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING,
WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.

DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION,
CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.

Limited Ninety (90) Day Warranty on Labor

TACP warrants this DAV Product and its parts against
defects in materials or workmanship for a period of ninety
(90) days after the date of original retail purchase.
DURING THIS PERIOD, TACP WILL, AT TACP'S
OPTION, REPAIR OR REPLACE A DEFECTIVE PART
WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU FOR PARTS OR LABOR.

Limited One (1) Year Warranty on Parts

TACP further warrants the parts in this DAV Product
against defects in materials or workmanship for a period
of one (1) year after the date of original retail purchase.
DURING THIS PERIOD, TACP WILL, AT TACP'S
OPTION, REPAIR OR REPLACE A DEFECTIVE PART
WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU FOR THE PART, PROVIDED THAT IF
A DEFECTIVE PART IS REPAIRED OR REPLACED
AFTER NINETY (90) DAYS AFTER THE DATE OF
ORIGINAL RETAIL PURCHASE, THE CONSUMER
SHALL PAY ALL LABOR CHARGES INVOLVED IN THE
REPAIR OR REPLACEMENT THEREOF.

Rental Units

The warranty for DAV Product rental units begins on the
date of the first rental or thirty (30) days after the date of
shipment to the rental firm, whichever comes first.

Commercial Units

DAV Products sold and used for commercial purposes
have a limited warranty for all parts and labor, which
warranty begins on the date of original retail purchase and
ends on the date that is ninety (90) days thereafter.

Owner's Manual and Product Registration Card

Read this owner’s manual thoroughly before operating
this DAV Product.

Complete and mail the enclosed product registration card
or register your DAV Product on-line at
www.tacp.toshiba.com/service as soon as possible. By
registering your DAV Product you will enable TACP to
bring you new products specifically designed to meet your
needs and help us to contact you in the unlikely event a
safety notification is required under the U.S. Consumer
Product Safety Act. Failure to complete and return the
product registration card does not diminish your warranty
rights.

Your Responsibility

THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:

(1) You must retain your bill of sale or provide other proof

of purchase.

(2) All warranty servicing of this DAV Product must be

made by the Depot Warranty Repair Center specified
by the TACP Consumer Solutions Center.

(3) The warranties from TACP are effective only if the

DAV Product is purchased and operated in the
Continental U.S.A. or Puerto Rico.

(4) Labor service charges for set installation, setup,

adjustment of customer controls, and installation or
repair of antenna systems are not covered by this
warranty. Reception problems caused by inadequate
antenna systems are your responsibility.

(5) Warranties extend only to defects in materials or

workmanship as limited above, and do not extend to
any DAV Product or parts that have been lost or
discarded by you or to damage to the DAV Product or
parts caused by fires, misuse, accident, Acts of God
(such as lightning or fluctuations in electric power),
improper installation, improper maintenance, or use in
violation of instructions furnished by TACP; use or
malfunction through simultaneous use of this DAV
Product and connected equipment; or to units that
have been modified or had the serial number
removed, altered, defaced, or rendered illegible.

Limited warranty