4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33027
(Revision Date: Sept. 5, 2014)
4.10 UHF RFID KIT (B-EX700-RFID-U4-US/EU/CN-R)
4-70
3) Set an
AGC threshold of data write.
Set a value which is lower than the AGC value by 1 or 2, taking variation of RFID tags in performance into
consideration.
(1) Choose “UHF SETTING”, and press the
[ENTER]
key.
(2) Choose “WRITE AGC THRESHOLD”, and press the
[ENTER]
key.
(3) Set a threshold value with
[UP]
or
[DOWN]
key, then press the
[ENTER]
key.
When the measured AGC was 9, for example, set “8” (a value lower than the measured AGC by 1
or 2.)
(4) Choose “WRITE RETRY MIN AGC”, and press the
[ENTER]
key.
(5) Set a lower limit with the
[UP]
or
[DOWN]
key.
Usually, set the same value with the AGC threshold for data write (WRITE AGC THRESHOLD).
In the case of this example, set “8” and press the
[ENTER]
key.
(6) AGC threshold setting is completed.
