6
Full automatic washing machine washes clothes according to the following procedures.
Take the “REGULAR” course of the “CONDENSED BUBBLE” as an example.
Put the laundry in the basket and start the machine. The sensor will weigh clothes and begin flowing water.
The pulsator begins to
revolve 6 seconds after
startup under none-water
situation, and clothes are
weighed.
1
Flowing water starts. Put in
detergent according to the
reference value through
entry gate of “Washing-
Spinning Tub”, followed by
softening agent. Close the
lid. Display of detergent
amount
Reference value of
detergent amount
2
The water level indicator will
be lighted when flowing water
ends by reaching the preset
water level.
•
When a chemical fiber, blending
fiber or spreadsheet is washed, the
water level may be a little bit low.
Adjust the water level by “WATER
LEVEL” button.
3
For the 1
st
and 2
nd
rinsing, the course is
executed for twice.
Stirring starts during flowing water while washing and flowing water are
executed simultaneously.
Times of flowing water differ depending on clothes weight and rinsing
frequency.
About the display of the
remaining time
The display is based on the flowing water amount of
15 liters/minute.
Under the following situations, washing time may be
longer than remaining time displayed, or the time
displayed may be changed during the process.
•
Flowing water amount is smaller than 15 liters/
minute.
•
Unsmooth water draining.
•
Gravity center of clothes shifts.
When flowing water amount is
small, the tank may not be
filled up.
Washing
CONDENSED BUBBLE
Stirring after
flowing water
Stirring during
flowing water
Stirring after
flowing water
Spinning after
draining
Shower rinsing
Flowing water starts while
the spin basket revolves
slowly.
Why does the washing time appear a little bit
long? Is the time displayed changed?
What is shower rinsing?
During stirring, flowing water and rinsing are
executed simultaneously.
Rins
OPERATION OF FULL AUTOMATIC WASHING MACHINE
