26
OPTION MODE
If you feel the amount of water is less or much
Water level is automatically set
to suit the amount of laundry. If
you feel the amount of water is
less or much, you can adjust it
as the following.
If you feel the amount of water is much.
If you feel the amount of water is less.
Turn the POWER on with pressing the WATER LEVEL button.
Adjust by pressing WASH.
Press twice.
Press once.
(Decrease approx. 10L.) (Decrease approx. 5L.)
Adjust by pressing PRESET.
Press once.
Press twice.
(Increase approx. 5L.) (Increase approx. 10L.)
Turn the POWER off. (Finished adjusting)
∗
Set it once, it is written in memory. You don’t have to set it on each laundry.
If you wish to turn off the end buzzer sound
•
You can turn off the buzzer sound by
1
Press the “COURSE” button and hold. Then press the POWER
button. After buzzer beeps 3 times, the end buzzer disabled.
2
Follow this instruction when you want to reset to enable the buzzer.
∗
After you set the buzzer, the washer will keep the setting in memory.
So it is not necessary to reset the buzzer every time.
1
Power on while holding the “
SUPER
SPIN DRY
” button.
2
Three beeps will be heard and the current setting will be deleted 5
second later. Shut down the system.
•
All setting will be restored to initial status.
If you want to return initial setting
Holding
If you wish to change the shower rinse to the static rinse
For the shower rinse, it needs twice for the
process. But for the static rinse, it needs only once.
1
Press this button to turn on the washer.
2
Press the
button and hold for 3 seconds. The buzzer sound will
be heard and the course will be set within 5 seconds. After that, turn
off the washer.
•
Follow this instruction for the shower rinse, and the buzzer
sound will be heard.
•
After the setting, the washer will keep the setting in memory.
So it is not necessary to reset every time.
Press
Press and hold for 3 seconds
SUPER
SPIN DRY
Press and hold
Press
Press
