background image

19

The following are not malfunctions.

BEFORE CALLING THE SERVICEMAN

When:

Check:

The first time you use your washing machine,
a small amount of water may drain out of the
drainage hose.

During operation the control panel gets warm.

The pulsator rotates bit by bit.

During washing and rinsing, lamps flickers.

During spinning, suddenly supplying the
water or rinsing.

Sloshing sounds of remaining water coming
from your washing machine after SPIN cycle
has been completed.

Spin extraction is not enough.

After pausing the machine during the spin
cycle, it will not starts immediately.

If operates the machine at spinning on and
off.

After water supply shut off or water with iron
rust appears.

The buzzer does not stop.

This is merely water lift over from the performance inspection performed
on your washing machine before it was shipped from the factory.

Because of the electronic parts radiate heat.

Because of preventing the laundry unbalancing, it rotates bit by bit.

It is the cause of the power source wiring in a house. If fluorescence light
be changed, it may improve condition.

Because load unbalance occurred and safety switch operated. The spin
will cycle resume after supplying water, rotating and correcting the
unbalanced load.

They are made by water retained by the machine for the purpose of
maintaining balance and do not indicate malfunction.

Spinning rate of fully automatic washing machine is lower than that of
twin tub washing machine. Sometimes spinning is uneven like thick parts
of blanket.

There are a short pause before the machine begins to spin as the
drainage valve opens sufficienty.

You may hear intermittent motor sound ("coon" sound) in spinning
process occurs, this is a sound which occurs in order to control rotation,
and not a malfunction.

Wait for water becomes clean. Returning type bleach can be used
(hydrohiter etc.) when iron rust adhered to the white colored clothes.  Avoid
using the bleach for colored articles.

If the CHILD PROOF mode is set to ON, and the lid is opened while the
machine is in operation, the buzzer beeps. Check inside the washing
machine. Press POWER to turn it off.

SPECIFICATIONS

HANDLING METHOD FOR EMERGENCY

When the machine takes on abnormal operation, please disconnect the power plug and send it to our service agency for
handling. Never disassemble the machine by yourself, for safety reasons.

Washing

system

Vortex type

Overall
dimension

Standard water consumption

Max. rated capacity
(Dry clothes weight)

585

 

(Width)

 

x

 

552

(Depth)

 

x

 

935

 

(Height)

135L

7.0kg

Rated period of operation

Regular cycle 55 min.

Standard amount of water

48L high water level

Water tap pressure

0.03~1MPa

Type

Fully automatic washer

Weight

31kg

Model

AW-8570S

Model

AW-8570S

Содержание AW-8570SM





















Отзывы: