10
MAINTENANCE
Softener case
Remove and clean after every ten usages.
Removal
1
Hold down the each.
2
And pull toward you.
Installation
1
Fit in the bottom.
2
Then press in the top until the
catch catches.
Caution
•
Water in the case may freeze in cold weather.
If this occurs, remove the case, immerse in warm water (less than 40
°
C) for 10 minutes, and replace after dried well.
Softener case
Catch
Washing machine body and panel
Before performing any maintenance on your washing machine, be sure to remove the electrical plug from its power source.
The main body and control panel may be cleaned by wiping with a soft cloth soaked in water.
(Hard-to-remove dirt may be cleaned by wiping with a soft cloth soaked in a mind detergent.)
Caution:
Never clean the body or control panel with benzine, thinner, cleanser, or other chemical cleaners. Use of such
chemicals can discolor or damage parts.
Cleaning the tub
"TUB CLEANING" course
The dirt from clothes or wastewater on the wash/spin basket will cause the
smell or the problem of water draining. Such dirt from the washing process
will then make the laundry dirty. If you are in such case,
please use "Tub
Cleaning" program once a month.
Or in case the clothes have been
starched, please use the "Tub Cleaning" program to remove the dirt of the
starch from the basket.
•
Normally use detergent.
•
The amount of detergent must be more than the guided Standard
Detergent Amount.
•
Do not use "Tub Cleaning" program continuously.
•
If there is a great amount of dirt inside the basket, you had better use
the chlorine-type basket cleaner for the washing machine.
Please follow the instruction labeled on the cleaner bag.
L
"Tub Cleaning" Process
1
Turn the POWER on.
2
Press the COURSE button and select
TUB CLEANING.
3
Press the START button.
•
During the "Tub Cleaning" program,
only the TUB CLEANING indicator will
light on.
4
When the pulsator (spinning board)
starts to spin, add the chlorine-type
whitening detergent about 300 ml. to
the basket.
•
Do not put any clothes in the basket
during the "Tub Cleaning" program.
5
Close the lid.
•
If the lid is opened during the operation,
the operation will stop before the
draining and rinsing process.
Finish "Tub Cleaning" process.
•
Beeping when the operation is finished.
Water Intake and stir
Soaking
Washing (Tub cleaning)
Draining water and spin
Water Intake and stir
Rinsing
Draining water and spin
about 5 min
about 20 min
about 3 min
about 4 min
about 5 min
about 3 min
about 1 min
Lint collector
Clean the lint collector after every use.
1
Remove the lint collector by lifting it up.
When the machine has stopped in a place
in which it is difficult to lift the lint collector
out, turn the basket by hand to a more
convenient place and remove the lint
collector.
2
Remove the lint by turning
the lint collector inside out.
3
Replace the lint collector.
•
In the event that the net is
damaged,consult your
nearest dealer.
6348100701 (07-10)
22/10/08, 11:18
10
