Toshiba 50L2300 series, Руководство пользователя

Страница: 12 / 32

Watching TV programmes
Selecting the menu language
You can select a language for the on-screen display.
• Use the menu: SETUP
• Use the item: Menu Language
Changing the position
1
Enter the desired position number using the
Number buttons on the remote control.
For positions below 10, use 0 and the required
number e.g., for position 1.
2
You can also change the position by using P
U
or P
u
.
The position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
Note:
Changing positions between diff erent format channels
takes several seconds.
Switching between two positions
You can switch two positions without entering
actual position number each time.
1
Select the fi rst position you want to view.
2
Select the second position with the Number
buttons (0-9).
3
Press . The previous channel will be displayed.
Each time you press , the TV will switch back and
forth between the two positions.
Displaying the on-screen information
1
Press to display the following on-screen
information.
4
ABCD
Stereo
The information will disappear in several
seconds.
To erase the display instantly, press
again.
Sorting positions
Ex.: To swap channel ABCD (Prog.1) for channel
MNOP (Prog.4):
1
From the SETUP menu, press

or

to select
Manual Tuning menu, and then press OK .
2
Press

or

to select the channel ABCD , then
press

.
Manual Tuning
Pos.
0
1 ABCD
2 EFGH
3 IJKL
MNOP 4
5
6
7
Label
3
Press

to select the new position “ 4 ”, then
press

.
4
Press

to select the channel MNOP , then press

.
5
Press

to select the new position “ 1 ”, then
press

.
6
Confi rm new Manual Tuning menu.
Selecting the video input source to view
1
Press
o
on the remote control until the video
input mode list appears on the screen, then
press

,

or
o
to select appropriate input
source (or touch
p
/
o
and
U
or
u
on the TV
left side panel to select required input source
directly).
2
Press OK .
TV (analogue aerial input),
VIDEO1 (
o
(1), COMPONENT/VIDEO NPUT,
standard or component video input),
VIDEO2 (
o
(2), standard video input),
HDMI 1 (HDMI 1 input),
HDMI 2 (HDMI 2 input),
PC (
o
RGB/PC, PC input)
Labeling external input sources
These input labels are shown in the input selector.
You can label external inputs according to the
devices you have connected to the TV.
1
From the PREFERENCES menu, press

or

to select AV Connection and then press OK .
2
Press

or

to select Input Labelling and
then press OK .
3
Press

or

to select the item you want to
label and press

or

to select --, Amplifi er ,
Cable , DVD , Game , PC , Recorder , Satellite or
VCR , or press the RED button to turn on the
skip.
– 12 –
50L2300Series̲EN.indd 12 50L2300Series̲EN.indd 12 2013/04/02 14:52:38 2013/04/02 14:52:38