54
CONTROLS AND FEATURES
En
glis
h
To format a USB HDD
a
In the
Recording Setup
screen, press
B
or
b
to select
Format Device
and press
OK
.
b
Press
C
or
c
to select
Yes
in the confirmation window
that will appear and press
OK
. Formatting will start.
Wait until formatting ends.
NOTE:
• If the USB HDD is separated several partitions by PC and
multiple Partition appear on the
Device List
screen, press
B
or
b
to select the Partition you want to format.
• When the USB HDD (or Partition) is formatted, all the data
stored on the USB HDD (or Partition) will be deleted.
If scheduled time slots are next to each other and there is
more than one minute between the end time of the first
schedule and the start time of the next schedule,
programmed recording will be performed correctly.
• When
Start Padding Time
and
End Padding Time
are set
(see page 53), the start time and end time will be the time
plus the additional minutes.
If scheduling times overlap, priority will be given to the
programmed recording which starts first. When the
programmed recording that started first ends, recording will
switch to the next scheduled programme. At this time,
depending on how far the scheduling times overlap, the
beginning section of the next scheduled programme may not
be recorded.
• When
End Padding Time
is set for the first programmed
recording (see page 53), depending on how far the
scheduling times overlap, the
End Padding Time
may be
ignored and recording of the next scheduled programme
may start. As priority is given to the time set in the
Set Timer
menu over the Padding Time, recording will automatically
be triggered when the next scheduled programme start
time is reached during
End Padding Time
.
Scheduling priority