20
SETTING UP YOUR TV
En
glis
h
d
When
Ant/Cable/Satellite
is set to
Cable
, the
following setting options will be provided in the
Auto
Tuning
screen.
Press
B
or
b
to select an item and press
C
or
c
to
select your desired option.
With the exception of
DTV Scan Type
and
DTV Modulation
items, all of the following items will have 2 operating modes.
The first is
Auto
where the values for each item are preset by
the system. The second is an
Input
mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the
Input
state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
Operator Selection:
You can choose the Cable operator depending on the
Country
you set.
DTV Scan Type:
This item determines whether a
Quick Scan
or a
Full Scan
will
be executed.
The
Quick Scan
is a simplified version of the
Full Scan
that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
grayed out when DTV Scan Type is set to “Full Scan”.
From the System Setup menu, you can add the satellites that you
wish to tune and configure detailed settings for each one
individually.
To add a satellite:
a
Press
MENU
/
C
c
to highlight
Setup
icon.
b
Press
B
/
C c
to highlight
System Setup
icon and
press
OK
.
c
Press
b
to select
Satellite Settings
and press
OK
.
d
Press
b
to highlight a new line to add an another
satellite and press
OK
.
e
Press
b
until the required satellite is displayed and
press
OK
.
To delete a satellite:
a
In the
Satellite Settings
menu, press
B
or
b
to select
the satellite you want to delete.
b
Press the
RED
button. A confirmation window will
appear.
c
Press
C
or
c
to select
Yes
and press
OK
.
NOTE:
It is not possible to delete position No.1.
Auto Tuning
DTV and ATV
Tuning Mode
DTV
Others
Operator Selection
Quick Scan
Scan Type
Auto
Start Frequency
Auto
End Frequency
Auto
Modulation
Auto
Symbol Rate
Auto
Network ID
Start Scan
Satellite Settings
Satellite
No.
Dish
LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
1
1
Switch Type
None
LNB Power
On
Done
Transponder: 1/85 (10729 MHz)
Dish Type: Fixed
Lower LOF: 9750
Upper LOF: 10600
