Toshiba 4580, Руководство по обслуживанию

Страница: 307 / 379

6570/5570 ADF 16 - 16 Mar. 1999 © TOSHIBA TEC
(11) Setting the original at the exposure position (completion of No.2 side feed)
The original is transported by a specified number of pulses after reversal starts. At the point where
the original arrives at the exposure position, the transport motor and reversal motor stop, and feed is
completed. The original is stopped in contact with the original stopper, and the rear side of the
original is set.
(12) Start of initial alignment to completion of initial alignment
When there is an original on the tray at the point when feed is completed, the initial alignment signal
is set, and initial alignment of the next original is started. The same processes as (2) and (3) are
carried out, initial alignment of the next original is completed, and the original stands by.
* When initial alignment is carried out on the 2nd original onwards, the dummy exit operation is not
carried out.
If there is no original on the tray, operation from (21) is started.
(13) Start of feed to aligning sensor OFF
When the feed signal is received, the feed motor, transport motor and reversal motor start to operate
in the forward direction to rotate the aligning roller, transport belt and reversal roller. Feed of the
original standing by at the initial alignment position and exit of the original set at the exposure posi-
tion are carried out simultaneously. In the same way as (4), the original size is detected at the point
when the trailing edge of the original has passed the aligning sensor.