Toshiba 4580, Руководство по обслуживанию

Страница: 305 / 379

6570/5570 ADF 16 - 14 Mar. 1999 © TOSHIBA TEC
(7) Start of reversal to flapper solenoid OFF
After forward rotation transport is completed, the transport motor starts to rotate in the reverse direc-
tion and the reversal motor starts to rotate in the forward direction to rotate the transport belt and
reversal roller to start reversal of the original. The original passes along the reversal path and is
transported onto the original glass. The DF operation in progress signal is reset at the reset timing of
the DF operation in progress signal. The stop notice signal is set at the set timing of the stop notice
signal. The original top side/rear side signal is set or reset at the point when the exit sensor detects
the trailing edge of the original. The original stop signal is set at the set timing of the original stop
signal.
At the point when the trailing edge of the original has passed the reversal flapper, the flapper sole-
noid turns OFF, and the reversal flapper is switched to the exit side.
(8) Setting the original at the exposure position (completion of No.1 side feed)
The original is transported by a specified number of pulses after reversal starts. At the point where
the original arrives at the exposure position, the transport motor and reversal motor stop, and feed is
completed. The original is stopped in contact with the original stopper, and the rear side of the origi-
nal is set.