Toshiba 4560, Руководство оператора

Страница: 116 / 180

114
Note: If more than 25 originals are set
inadvertently, the first run of 20 sets of
copies is made and/or stapled normally;
however, during the second run, when
the sort bins become full, the copier
stops and displays this message:
Remove paper from
sorter bins
Then, after removing all copies from the
sorter:
●
If you selected SORT, press the PRINT
key again to make the remaining
copies and add them to the incomplete
sets of copies.
●
If you selected STAPLE, press the
FUNCTION CLEAR key and make
the needed number of copies of the
remaining originals. Add these copies to
the incomplete sets of copies and staple
them manually. (See page 111 for manual
stapling.)
20 sets of copies will be made.
●
After 20 sets of copies finish being made,
message
“Return the originals to doc.
feeder input tray” is shown.
Then, return the originals to the original
feed tray.
Press the PRINT key to make the
remaining sets of copies.
66666
77777
3. SORT OR STAPLE COPYING (Cont.)