Toshiba 42RV600A, Руководство пользователя

Страница: 24 / 52

24
Using the TV’s features (General)
Using Auto Format
When the TV receives a true HDMI signal picture and
Auto Format is On, the picture will automatically be
displayed in HDMI signal format, irrespective of the TV’s
previous setting. When in Digital TV mode, the display
format will follow the broadcasted format.
1
Press
MENU
, and then press v or w to display the
PREFERENCES
menu.
PREFERENCES
REGZA-LINK Setup
Photo Frame Setup
Teletext
Panel Lock
Auto Format
Blue Screen
4:3 Stretch
Off
Auto
Auto
Off
On
Off
On
Side Panel
1
2
Press s or r to select Auto Format , and then press
v or w to select On or Off .
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
- analogue only -
Auto mode
The MTS Auto mode automatically recognizes stereo/
bilingual programmes depending on the broadcast signal.
1
Press MENU , and then press
v
or
w
to display the
SOUND menu.
0
0
0
SOUND
MTS
Dual
Dual 1
Low
Off
Bass
Treble
Balance
Advanced Sound Settings
Dynamic Range Control
Dolby Volume
Auto
2
Press s or r to select MTS , and then press v or w
to select Auto or Mono .
Mono mode
If you experience noise or poor reception of any stereo/
bilingual programme, set the
MTS
mode to
Mono
.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular programme
whose channel reception is usually good, try setting
MTS mode to
Auto , and then switch
b
to
e
Mono (monaural).
Selecting Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound, when bilingual
programmes are received.
1
From the
SOUND
menu, press s or r to select
Dual
.
2
Press v or w to select Dual 1 or Dual 2 .
Notes:
• When the MTS setting is in Mono mode, the Dual
menu is not selectable.
• The Dual menu setting status is stored even when
the TV is turned off.
Stereo and Bilingual transmissions
For ATV programmes
If stereo or dual language broadcasts are transmitted, the
word
Stereo
or
Dual
will appear on the screen each time
positions are changed, disappearing after a few seconds. If
the broadcast is not in stereo, the word Mono will appear.
Stereo … Press
b
to select Stereo or Mono .
Bilingual … Bilingual transmissions are rare. If they
are transmitted, the word Dual will display. Choose the
desired channel number, and if the word
Dual
appears,
press
b
to select
Dual 1
,
Dual 2
,
Mono
(NICAM) or
Dual 1
or
Dual 2
(German stereo/bilingual broadcast).
For DTV programmes
For stereo or dual mono broadcasts, press
b
, and then
use v or w to select settings.
Mode Display
Pressing
w
d
Stereo Stereo
S
Left
S
Right
j
Dual mono Dual 1
S
Dual 2
S
Dual
e
Mono
—
Surround —
Adjusting the sound quality
1
From the SOUND menu, press
s
or
r
to select the
item you want to adjust.
2
Press v or w to adjust the settings as desired.
Selection
v Pressing w
Bass weaker stronger
Treble weaker stronger
Balance decreases the right
channel
decreases the left
channel