Toshiba 40WL768 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 88

background image

11

CONNECTING YOUR TV

E

n

g

lish

Connecting an HDMI

®

or DVI

device to the HDMI input

The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device or uncompressed digital video
from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant

[1]

consumer electronic

devices (such as a set-top box or DVD player with HDMI or DVI
output). For acceptable video signal formats, see page 85.

NOTE:

• Some early HDMI equipment may not work properly with

your latest HDMI TV, due to the adoption of a new standard.
Please unplug your HDMI cable first and then try setting the

INSTAPORT™

and

Enable Content Type

options to “

Off

”.

Your early HDMI source should operate properly with your
television. See page 73.

• Supported Audio format: Linear PCM, Dolby Digital (AC-3),

sampling rate 32/44.1/48kHz.

Connect an HDMI cable (type A connector) to the HDMI terminal.

For proper operation, it is recommended that you use an HDMI
cable with the HDMI Logo (

).

• If your HDMI connection is capable of 1080p and/or your

television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this model.

• HDMI cable transfers both video and audio. Separate

analogue audio cables are not required (see illustration).

• See “HDMI 2 Audio” on page 73.

To view the HDMI device video, press the

o

button to select

HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.

Connect an HDMI-to-DVI adaptor cable (HDMI type A
connector) to the HDMI 2 terminal and audio cables to the PC/
HDMI 2 (AUDIO) socket (see illustration).
• The recommended HDMI-to-DVI adaptor cable length is

6.6 ft (2m).

• An HDMI-to-DVI adaptor cable transfers video only.

Separate analogue audio cables are required.

• See “HDMI 2 Audio” on page 73.

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the

television first, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the

HDMI or DVI device first, and then the television.

This feature enables the audio signal of the TV to be sent to the
AV amplifier via the HDMI cable. It will not be necessary to
connect a cable from the audio output of the TV to the audio
input of the AV amplifier to reproduce the audio received from
the tuner of the TV through the AV amplifier.

To connect an HDMI device

HDMI cable

HDMI device

the back of your television

To connect a DVI device

HDMI’s ARC (Audio Return Channel) feature

HDMI-to- DVI
adaptor Cable

Audio cable for HDMI to

television connection

(not supplied)

DVI device

HDMI cable

AV amplifier that supports ARC

«
...
9
10
11
12
13
...
»

Содержание 40WL768

























































































Отзывы:

Нет отзывов

Похожие инструкции для 40WL768

Бренд: Palsonic Страницы: 27

Furrion Aurora FDUF43CBR

Бренд: Lippert Страницы: 2

Бренд: Magnavox Страницы: 32

Бренд: Olevia Страницы: 68

Бренд: Sansui Страницы: 21

Бренд: Linden Group Страницы: 30

Бренд: VIORE Страницы: 19

Бренд: LG Страницы: 53

Бренд: LG Страницы: 84

Бренд: RCA Victor Страницы: 32

Бренд: Magnavox Страницы: 13

Aquos LC 32D50U

Бренд: Sharp Страницы: 2

Бренд: Sharp Страницы: 44

Aquos LC 22SV2U

Бренд: Sharp Страницы: 49

Aquos LC 20D30U

Бренд: Sharp Страницы: 45

Aquos LC 32D50U

Бренд: Sharp Страницы: 82

Aquos LC 30HV2U

Бренд: Sharp Страницы: 81

Бренд: Sharp Страницы: 69

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды