22
Toshiba 40" 1080p 60Hz LED TV
U.S.: http://support.toshiba.com Canada: http://support.toshiba.ca/support/ceg/
AV (composite video) (good)
1
Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2
Connect an AV cable (not provided) to the green
Y/VIDEO
jack and
AUDIO
L
and
R
jacks on the back of your TV and
to the
AV OUT
jacks on the DVD or Blu-ray player.
3
Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4
Press
INPUT
to open the
Input Selection
list.
5
Press
S
or
T
to highlight
Video
, then press
ENTER
.
6
Set up the shared video jacks. See
Setting up the Y/VIDEO, Pb, and Pr video jacks
on page
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
Y/VIDEO
jack.
Important
• The
Y/VIDEO
,
P
B
, and
P
R
video jacks (used to connect a component
device) share the
AUDIO
L
and
R
jacks with the
Y/VIDEO
jack (used to
connect an AV device). You can only connect one component video or
AV device at a time. We suggest upgrading to HDMI if your DVD or
Blu-ray player supports it.
• When you connect the audio using the
AUDIO
L
and
R
jacks, the audio
output is analog.
AV cable
Back of TV
AV cable
connector
AV jack
Audio cable
connectors
Analog
audio jacks
DVD or Blu-ray
player
On your TV