34
Toshiba 40" 1080p 60Hz LED TV
U.S.: http://support.toshiba.com Canada: http://support.toshiba.ca/support/ceg/
Setting up the video input
jacks
This section includes topic about:
• Setting up the ANT/CABLE IN jack
• Setting up the Y/VIDEO, Pb, and Pr video jacks
• Setting the RGB range for HDMI jacks
Setting up the ANT/CABLE IN jack
If you connect an antenna or cable TV without a box
to the
ANT/CABLE IN
jack, you need to set up the jack
so your TV correctly displays channels.
1
Press
MENU
, press
S
or
T
to highlight
Installation
, then press
ENTER
.
2
Highlight
Channel Tuning
, then press
ENTER
.
3
Highlight
ANT/CABLE In
, then press
ENTER
.
4
Highlight your TV input source, then press
ENTER
.
Select:
•
Antenna
if you connected an antenna to the
ANT/CABLE IN
jack
•
Cable
if you connected cable TV without a box
to the
ANT/CABLE IN
jack
5
Press
EXIT
to close the menu.
Setting up the Y/VIDEO, P
B
, and P
R
video jacks
The
Y/VIDEO
,
P
B
, and
P
R
video jacks (used to connect
a component video device) share the
L
and
R
AUDIO
jacks with the
Y/VIDEO
jack (used to connect an AV
device). You can only connect one component video
or AV device at a time.
You need to set up the
Y/VIDEO
,
P
B
, and
P
R
video
jacks so your TV know what type of device is
connected.
1
Press
MENU
, press
S
or
T
to highlight
Options
,
then press
ENTER
.
2
Highlight
Input Options
, then press
ENTER
.
3
Highlight
AV Input
, then press
ENTER
.