14
Toshiba 40" 1080p 60Hz LED TV
U.S.: http://support.toshiba.com Canada: http://support.toshiba.ca/support/ceg/
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
on page
You can connect a cable or satellite box using:
• HDMI (best)
• DVI (same as HDMI but requires an audio connection)
• Component video (better)
• AV (composite video) (good)
• Coaxial (good)
HDMI (best)
1
Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3
Connect an HDMI cable (not provided) to one of the
HDMI IN
jacks on the back of your TV and to the
HDMI
OUT
jack on the cable or satellite box.
4
Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5
Press
INPUT
to open the
Input Selection
list.
6
Press
S
or
T
to highlight
HDMI 1
or
HDMI 2
, then press
ENTER
.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
HDMI cable
Cable or
satellite box
Back of TV
HDMI cable
connector
HDMI jack
On your TV
Cable wall
jack