27
Using the TV’s features (General)
Notes:
•
This function depend on the devices connected.
•
When the TV is switched on, it will take a few minutes for the
REGZA-LINK
icon to appear in the list; when an HDMI cable
is removed, it will take a few minutes for the icon to
disappear.
•
If the HDMI cable from connected device is changed or
HDMI cable from connected device setting are changed,
Enable REGZA-LINK
in the
REGZA-LINK
menu may need
to be reset
On
.
To control the REGZA-LINK device
First select the
HDMI
input source with the desired REGZA-
LINK device connected, then switch the mode on the remote
control to
REGZA-LINK
and press the available button on the
remote control (
-
page 11).
The TV features that can be controlled by the connected
device remote control are:
Power standby, Volume, Program channel, Sound mute, Input
selection, Number buttons, Previous programme channel.
Note:
These functions are dependent on the connected device. Not
all the remote control buttons may be available. Please refer to
the owner’s manual for all the connected devices.
Teletext in Analog TV
This TV has a multi-page teletext memory, which takes a few
moments to load and it offers two ways of viewing Teletext
Auto
and
LIST
which are explained below.
Setting up the teletext mode
To select a language for teletext:
The language 1-4 option enables the display of different
language when using Teletext.
1
Press
M
, then press
or
to display the
FUNCTION
menu.
2
Press
or
to select
Teletext lan
g
ua
g
e
, then press
or
to select the required language.
•
Lan
g
ua
g
e 1:
English, German, Dutch, Flemish,
Russian, Byelorussian, Bulgarian, Ukranian, Lettish,
Lithuanian, Czech, Slovak, Estonian
•
Lan
g
ua
g
e 2:
Polish, German, Dutch, Flemish,
Estonian, Lettish, Lithuanian, French, Serbian,
Croatian, Slovenian, Czech, Slovak, Rumanian
•
Lan
g
ua
g
e 3:
English, French, Hebrew, Turkish,
Arabic
•
Lan
g
ua
g
e 4:
English, French, Hebrew, Turkish,
Farsi (Iranian/Persian)
To select teletext mode:
Select a channel position with the desired teletext service.
1
From the
FUNCTION
menu, press
or
to select
Teletext
.
2
Press
or
to select
Auto
or
LIST
mode.
Note:
When you are watching the teletext programme,
SET UP
menu
and
FUNCTION
menu are not selectable.
Teletext general information
button:
Pressing
once will bring up the teletext screen. Press
again to superimpose the teletext over a normal broadcast
picture. Press again to return to normal TV mode. You need to
return to normal viewing if you wish to change channels.
When you first press
to access the text service, the first
page you see will be the initial page.
In
Auto
mode, this displays the main subjects available and
their relevant page numbers.
In
LIST
mode, you will see the page numbers currently stored
on the
each colour
button.
Sub-pages:
Once in this chosen page, if there are sub-pages they will
automatically load into memory without changing the one you
are reading. If there are many sub-pages, it will take a long
time for them all to load and this will depend on the speed with
which the broadcaster transmits them.
To access the sub-pages in memory, press
l
,
then use
P
U
/
P
u
to view them
.
Note:
If you press
r
while the picture mode is activated, this mode
will be cancelled.
Using Auto mode
There are two Modes:
Auto
will display FASTEXT or
TOPTEXT, if available.
LIST
will display your four favorite
pages. In either mode, as an alternative to the coloured buttons,
you can access a page by entering a 3-digit number, using the
Number
buttons on the remote control, or to advance to the
next page, press
P
U
, to go back to the previous page press
P
u
.
To change between
Auto
and
LIST
, see above.
• Press
to access teletext.
FUNCTION
MENU
Back Watch
TV
EXIT
Teletext
Auto
Teletext language
1
Auto for mat
Blue screen
Side panel
On
4:3 stretch
Off
On
1
100 Spor t
14:57:55
S
w
imming
Racing
Baseball
Football
Red
Ex.
FASTEXT
Green
Yellow
Blue
Содержание 37XV500A
Страница 44: ...YC J ...
