Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
23
Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on-screen display of adjustment menus and messages.
To select an on-screen display language:
1. Press MENU, and then press
x
or
•
until the SET UP menu
appears.
2. Press
y
or
z
to highlight LANGUAGE.
3. Press
x
or
•
to highlight your desired language.
MOVE SELECT [ ]
[ ]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH]
FRANCAIS ESPANOL
[TV] CABLE
[ADD] ERASE
SET UP
ANT 1/2:
[ANT1] ANT2
Programming channels into the channel
memory
When you press CHANNEL
y
or
z
on the remote control or
TV front panel, your TV will stop only on the channels stored in the
channel memory. Follow the steps below and on the next page to
program channels into the channel memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in the channel memory. After the channels are stored
automatically, you can manually add or erase individual channels. If
you use both ANT 1 and ANT 2 input sources, you must program
channels for each source separately.
To program channels automatically:
1. Press MENU, and then press
x
or
•
until the SET UP menu
appears.
2. Press
y
or
z
until ANT 1/2 is highlighted.
3. Press
x
or
•
to highlight either ANT 1 or ANT 2, depending on
which antenna input you are programming channels for.
MOVE SELECT [ ]
[ ]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH] FRANCAIS ESPANOL
[ANT1]
ANT2
[TV] CABLE
[ADD] ERASE
SET UP
4. Press
y
or
z
until TV/CABLE is highlighted.
5. Press
x
or
•
to highlight either TV (if you use an antenna) or
CABLE (if you have cable service).
MOVE SELECT [ ]
[ ]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH] FRANCAIS ESPANOL
[TV]
CABLE
[ADD] ERASE
SET UP
ANT 1/2:
[ANT1] ANT2
MENU
yzx
•
CHANNEL
yz
(Continued on next page)
